Specialized WiFi dead angle, Tenda dual-band WiFi signal amplifier A18 struck

With the rapid increase of the network, the demand for WiFi is increasing, and the quality requirements of WiFi are also rising. Nowadays, routers have entered the 11AC dual-band era. The 2.4GHz WiFi transmission distance is far, and the 5GHz WiFi transmission speed is fast. The two complement each other to improve our WiFi experience.

However, in the face of some large-sized or complex-structured units, routers with more powerful performances will feel powerless. To this end, Tengda launched the dual-band WiFi signal amplifier A18, which can “diffuse” the original WiFi signal to every corner of the home, effectively solving various WiFi signal differences and network instability.

1, dual-frequency routing good partner, strong 5G easy to wear through the wall

The common 11AC dual-band routers have the problem that the 5G signal is weak through the wall. The Tengda A18 supports 2.4GHz and 5GHz signals, and can simultaneously expand the network of two frequency bands. The A18 relay 5GHz signal can fully utilize the bandwidth rate of 100M optical fiber. The highest frequency can reach 867MBps. Solve the problem of insufficient coverage of local 5G signals, and truly achieve 5GHz WiFi coverage, allowing users to enjoy high-speed Internet access anytime, anywhere.

2, automatically select high-quality signals, easy to access the Internet without dropping

The A18 uses a high-quality PCB dual-band antenna. The antenna RF spacing is optimized to um level. Each antenna provides 2.4G and 5G signals at the same time. When the WiFi signal fluctuates, it can automatically select high-quality signals for bridging; and when the Internet device moves, Tengda A18 will automatically select a stronger signal source according to the strength of the signal source, which signal is stronger, which is intelligent and seamless to ensure that the Internet does not drop.

3, visualize WiFi amplification, the signal is good or bad at a glance

Whether the location of the WiFi amplifier is properly or not directly affects the quality of the signal, too far from the router, the WiFi signal expansion effect is poor; the distance is too close, the effect of the expansion is not obvious. Tengda A18 provides the indicator of the signal strength corresponding to the routing distance. Blue represents the bridgeable range, and red represents the non-bridgeable area. Users can easily find the suitable placement position.

4, mobile phone three-step settings, wireless expansion is completed in one minute

For the WiFi extender, in addition to the good expansion, it is equally important to install. Tenda A18 installation does not require cumbersome steps, all operations can be completed on the mobile phone, tablet, wireless expansion is completed in 1 minute. The relayed A18 signal can be consistent or reset with the upper route.

5, exquisite appearance, short and fine

From the appearance, the Tengda A18 adopts a white minimalist design. Compared with other WiFi amplifiers on the market, the A18 is smaller in size. It has two high-performance antennas that can be rotated 180 degrees. There are 3 display lights and a WPS in the lower right corner. The keys, the left and right sides and the upper and lower sides are evenly distributed heat dissipation holes, and there is no need to worry about the heat dissipation problem. Exquisite and compact, easy to insert, fascinating and flexible.

6, support multiple functions

Tenda A18 supports hidden SSID function, WPS one-button bridging, and encryption mode of Mix WPA/WPA2.